Programming instructions

Atmel AT02597: ZigBee PRO Packet Analysis with Sniffer [APPLICATION NOTE]
32210A−WIRELESS−09/2013
14
Figure 3-3. Wireshark Capture Screen Layout.
3.2 BitCatcher
• Protocols: By default, BitCatcher is automatically able to parse the following protocol packets:
• IEEE 802.15.4 MAC
• ZigBee PRO (Network, ZDO and APS layers)
• ZigBee Public Profiles such as ZigBee Smart Energy, Home Automation, and Light Link
It is not possible to explicitly disable any of the above protocols in BitCatcher, although it is possible to enable
or disable packet views of various ZigBee PRO layers (NWK, APS and ZCL).
This configuration can be done using menu option Window -> Sniffer -> Preferences ->Layers
• Security: It is possible to monitor encrypted ZigBee network data by entering the NWK security key used in
the network. Use menu option Window -> Sniffer -> Preferences -> Core security as shown in Figure 3-4
Figure 3-4. Security Preferences in BitCatcher.