User's Manual
Table Of Contents
- 1. Overview
- 2. Applications
- 3. Features
- 4. Technical data
- 5. Mechanical size
- 6. Soldering profile
- 7. Pin assignment
- 8. PCB design
- 9. Clock
- 10. Application circuits
- 11. Programming
- 12. Pre-flashed firmware
- 13. Adapter boards
- 14. Radio certification
- 15. Ordering information
- 16. Packaging dimension
- 17. Revision notes
- 18. References
User Manual
Version 1.1c
2013-07-01
OEM radio modules deRFmega
www.dresden-elektronik.de
Page 5 of 52
Abbreviations
Abbreviation
Description
IEEE 802.15.4
IEEE 802.15.4 standard, applicable to low-rate Wireless Personal Area
Networks (WPAN)
6LoWPAN
IPv6 over Low Power Wireless Personal Area Networks
ADC
Analog to Digital Converter
CE
Consumer Electronics
EMI
Electromagnetic Interference
ETSI
European Telecommunications Standards Institute
FCC
Federal Communications Commission
GPIO
Generals Purpose Input Output
JTAG
Joint Test Action Group, digital interface for debugging of embedded
devices, also known as IEEE 1149.1 standard interface
ISA SP100
International Society of Automation, the Committee establishes standards
and related technical information for implementing wireless systems.
ISP
In-System-Programming
LGA
Land Grid Array, a type of surface-mount packaging for integrated circuits
LNA
Low Noise Amplifier
MAC
Medium (Media) Access Control
MCU, µC
Microcontroller Unit
PA
Power Amplifier
PCB
Printed Circuit Board
PWM
Pulse Width Modulation
RF
Radio Frequency
R&TTE
Radio and Telecommunications Terminal Equipment
(Directive of the European Union)
SPI
Serial Peripheral Interface
TWI
Two-Wire Serial Interface
U[S]ART
Universal [Synchronous/]Asynchronous Receiver Transmitter
USB
Universal Serial Bus
ZigBee
Low-cost, low-power wireless mesh network standard. The ZigBee Alliance
is a group of companies that maintain and publish the ZigBee standard.