User's Manual

User Manual
Version 1.1c
2013-07-01
OEM radio modules deRFmega
Page 48 of 52
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense (FCC section 15.105).
14.2. European Union (ETSI)
The deRFmega128-22M00, deRFmega128-22M10 and deRFmega128-22M12 are conform
for use in European Union countries.
If the deRFmega128-22M00, deRFmega128-22M10 and deRFmega128-22M12 modules are
incorporated into a product, the manufacturer must ensure compliance of the final product to
the European harmonized EMC and low-voltage/safety standards. A Declaration of
Conformity must be issued for each of these standards and kept on file as described in
Annex II of the R&TTE Directive.
The manufacturer must maintain a copy of the deRFmega128-22M00, deRFmega128-
22M10 and deRFmega128-22M12 modules documentation and ensure the final product
does not exceed the specified power ratings, antenna specifications, and/or installation
requirements as specified in the user manual. If any of these specifications are exceeded in
the final product, a submission must be made to a notified body for compliance testing to all
required standards.
The CE marking must be affixed to a visible location on the OEM product. The CE mark shall
consist of the initials "CE" taking the following form:
If the CE marking is reduced or enlarged, the proportions must be respected.
The CE marking must have a height of at least 5 mm except where this is not
possible on account of the nature of the apparatus.
The CE marking must be affixed visibly, legibly, and indelibly.
More detailed information about CE marking requirements can be found in [6].
14.3. Approved antennas
The deRFmega128-22M00 has an integrated chip antenna. The design is fully compliant with
all regulations.
The deRFmega128-22M10 and deRFmega128-22M12 will be tested with external antennas.
The approved antenna list will be updated after certification process has finished.