User's Manual
Table Of Contents
- 1. Overview
- 2. Applications
- 3. Features
- 4. Technical data
- 5. Mechanical size
- 6. Soldering profile
- 7. Pin assignment
- 8. PCB design
- 9. Clock
- 10. Application circuits
- 11. Programming
- 12. Pre-flashed firmware
- 13. Adapter boards
- 14. Radio certification
- 15. Ordering information
- 16. Packaging dimension
- 17. Revision notes
- 18. References
User Manual
Version 1.1c
2013-07-01
OEM radio modules deRFmega
www.dresden-elektronik.de
Page 46 of 52
11. Programming
The programming procedures are described in the user manual [3], which is online available
on dresden elektronik webpage. It describes the update process of the radio module, the
required software and hardware for programming via JTAG and the driver installation on
different operating systems.
12. Pre-flashed firmware
Actually, the radio modules will be delivered without pre-flashed firmware.
13. Adapter boards
dresden elektronik offers these radio modules soldered on suitable adapter boards
(deRFholder). These boards can be plugged into dresden elektronik's development hardware
platforms deRFbreakout Board, deRFnode or deRFgateway. For detailed information please
refer to the deRFholder datasheets [4] and [5].
Figure 41: deRFmega128-22T00 with radio module deRFmega128-22M00
Figure 42: deRFmega128-22T02 with radio module deRFmega128-22M10
Figure 43: deRFmega128-22T13 with radio module deRFmega128-22M12