User's Manual

User Manual
Version 01.01
2011-12-22
Radio modules deRFarm7
dresden elektronik
ingenieurtechnik gmbh
Enno-Heidebroek-Str. 12
01237 Dresden / Germany
Tel.: +49 351 – 31 85 00
Fax: +49 351 – 3 18 50 10
[e-mail]
www.dresden-elektronik.de
Page 32 of 38
11. Radio certification
11.1. United States (FCC)
The deRFarm7-15A02, deRFarm7-25A00, deRFarm7-25A02, deRFarm7-15C02, deRFarm7-
25C00, deRFarm7-25C02 radio modules comply with the requirements of FCC part 15.
To fulfill FCC Certification requirements, an OEM manufacturer must comply with the follow-
ing regulations:
The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is
not visible when the module is installed inside another device, then the outside of the device
into which the module is installed must also display a label referring to the enclosed module.
This exterior label can use wording such as the following. Any similar wording that expresses
the same meaning may be used.
Sample label for radio module deRFarm7-25A00 and deRarm7-25C00:
FCC-ID: XVV-ARM725A00
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must ac-
cept any interference received, including interference that may cause undesired operation.
Sample label for radio module deRFarm7-25A02 and deRarm7-25C02:
FCC-ID: XVV-ARM725A02
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must ac-
cept any interference received, including interference that may cause undesired operation.
Sample label for radio module deRFarm7-15A02:
FCC-ID: XVV-ARM715A02
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must ac-
cept any interference received, including interference that may cause undesired operation.
Note: The radio modules deRFarm7-15C02, deRFarm7-25C00 and deRFarm7-25C02 fulfill a
Permissive Change Class 1 regarding to FCC Section 2.1043 and complies with the re-
quirements of FCC part 15.
To be used with the deRFarm7-15A02, deRFarm7-25A02 modules, the external antenna
have been tested and approved which is specified in here below. The deRFarm7-15A02,
deRFarm7-25A02 modules may be integrated with other custom design antennas which
OEM installer must authorize following the FCC 15.21 requirements.
The Original Equipment Manufacturer (OEM) must ensure that the OEM modular transmitter
is labeled with its own FCC ID number. This includes a clearly visible label on the outside of
the final product enclosure that displays the contents shown below. If the FCC ID is not visi-