User's Manual
Table Of Contents
User Manual
Version 01.01
2011-12-22
Radio modules deRFarm7
dresden elektronik
ingenieurtechnik gmbh
Enno-Heidebroek-Str. 12
01237 Dresden / Germany
Tel.: +49 351 – 31 85 00
Fax: +49 351 – 3 18 50 10
wireless@dresden-elektronik.de
www.dresden-elektronik.de
Page 23 of 38
8.2. Programming example
The described programming examples was done with Atmel‟s programming software „SAM-
BA v2.10‟, which is free downloadable on Atmel homepage. Install SAM-BA v2.10 on the PC
or Laptop and connect the hardware described in section 8.1.
1. Start SAM-BA v2.10
The start screen (Figure 17) shows two selection tables. At first choose the connect-
ed SEGGER-SAM-ICE programmer (Figure 18) and then the connected board
(Figure 19). In this case the assembled MCU is important for selection, that means
choose AT91SAM7X512-EK.
Figure 17: SAM-BA start screen
Figure 18: SAM-BA start screen – Choose programmer
Figure 19: SAM-BA start screen – Choose MCU