User's Manual

User Manual
Version 1.1
2011-10-21
Radio modules deRFarm7
dresden elektronik
ingenieurtechnik gmbh
Enno-Heidebroek-Str. 12
01237 Dresden / Germany
Tel.: +49 351 – 31 85 00
Fax: +49 351 – 3 18 50 10
[e-mail]
www.dresden-elektronik.de
Page 21 of 31
8. Programming
8.1. Required hardware
Dresden elektronik ingenieurtechnik gmbh offers the hardware components for a fast startup.
The following hardware setups are possible:
• deRFarm7 radio module
• deRFgateway or deRFnode (baseboard)
• SEGGER SAM-ICE similar programmer
For example, to exchange the firmware of an ARM-based radio module, use the Atmel SAM-
ICE JTAG Emulator and the SAM-Prog firmware updater. The programmer has to be
plugged to the baseboard which is DC- or USB-powered.
Figure 16: SAM-ICE connected with baseboard plus plugged radio module