operation manual

ManualsBrandsDremel Manuals3D PrintersIdea Builder 3D40

BEST PRACTICES

1. 

2. Ensure your build platform is level before every

object.

3. Ensure spool is installed properly and can rotate

freely.

4. 







5. It is important to watch your Dremel 3D40 begin

building objects. Your object is most likely to



this is also the most convenient time to cancel



object again. Remain near the Dremel 3D40 during

the building process.

6. It is important to save your Dremel 3D40 packaging



Dremel 3D40 easier.

7. 

environment that is not moist or too hot. It is



spool from its airtight packaging until use.

8. 

the build platform or object.

9. 



orientation for your object is critical. Ensure that

your object is located on the build platform and that

you are using the best orientation for building.

10. 

is recommended to build with support.

11. Always remove the build platform before removing

the object.

12. Low speed sanding is recommended to prevent

remelting of the object.

13. 



the length indicated on the spool length gauge.

14. Monitor the status of your builds using the Dremel

3D mobile app or Dremel3D.com website.

MAINTENANCE

UNCLOGGING THE EXTRUDER





1. 



2. Clogged debris will be pushed down and will



FIG. 9