operation manual

LEVELING BUILD PLATFORM

WARNING

DO NOT TOUCH THE EXTRUDER

TIP DURING DREMEL 3D40

OPERATION OR UNTIL IT HAS COOLED DOWN TO

60°C (140°F). CONTACT WITH THE EXTRUDER TIP

DURING OR AFTER OPERATION BEFORE TIP HAS

COOLED MAY RESULT IN PERSONAL INJURY.

It is important you level the build platform every time

you replace the build tape or reinstall the build platform

to ensure that the build platform is evenly spaced



bubbles from between the build platform and the build

tape. Not leveling the build platform or eliminating air

bubbles may cause objects to not build properly.

1. 



Tape after leveling may effect the consistency of

your object.

2. 

3. 



check level at the back center of the build platform.

The two knobs under the build platform are used

to raise and lower the build platform on the left and





4. The touchscreen will indicate if your build platform

is too high or too low. If the build platform is too





indicates that it is ready to verify that the bed is

level.

5. 



touchscreen indicates that it is ready to verify that

the bed is level.

6. 

adjustment is needed the touchscreen will indicate





be repeated.

7. 



move to the calibration position and complete the

leveling process.