operation manual

FIG. 2

 Filament  

5. 









6. 



7. 







8. 



NOTE: Your Dremel 3D40 was tested by building

objects before leaving the factory. These test

objects may have been made with a different

lament color than you are using. Therefore, a

small amount of lament may be remaining in the

extruder.

9. 











pliers.

WARNING

USE EXTRA CARE NOT TO

DAMAGE THE EXTRUDER TIP

WHEN CLEARING DEBRIS. DREMEL 3D40 WILL NOT

WORK PROPERLY WITH A DAMAGED EXTRUDER TIP

AND WILL REQUIRE REPLACEMENT.

10. Close 3D40 lid and door.