Specifications

15
The number and variety of accessories for the
Rotary Tool are almost limitless. There is a
category suited to almost any job you might
have to do — and a variety of sizes and shapes
within each category which en ables you to get
the perfect accessory for every need.
!.;1?29@
A mandrel is a shank with a threaded or screw
head, which are required when you use
polishing accessories, cutting wheels, sanding
discs, and pol ish ing points. The reason
mandrels are used is that sanding discs,
cutting wheels and similar accesso ries must be
replaced frequently. The mandrel is a per -
manent shank, allowing you to replace only the
worn head when necessary, thus saving the
expense of replacing the shaft each time.
&0?2D!.;1?29"H
This is a screw mandrel used with the felt
polishing tip and felt polishing wheels. 1/8"
shank.
&:.99&0?2D!.;1?29"H
This is a mandrel with a small screw at its tip,
and is used with emery and fiberglass cutting
wheels, sanding discs and polishing wheels.
1/8" shank.
- <08J!.;1?29"H
The Dremel EZ Lock makes accessory
changes easy as PULL - TWIST - RELEASE.
The one-piece mandrel design simplifies the
process of changing cutting wheels, buffs and
detail abrasive brushes (EZ Lock compatible
accessories).
-?B:J!.;1?29"H-&
The Dremel EZ Drum makes accessory
changes easy as PULL - PLACE - SECURE.
The one-piece mandrel design simplifies the
process of changing sanding discs.
645&=221BAA2?@
Available in many shapes, high speed cutters
are used in carving, cutting and slotting in
wood, plastics and soft metals such as
aluminum, copper and brass. These are the
accessories to use for freehand routing or
carving in wood or plastic, and for precision
cutting. Made of high quality steel. 1/8" shank.
'B;4@A2;.?/612BAA2?@
These are tough, long-lived cutters for use on
hard ened steel, fired ceramics and other very
hard ma terials. They can be used for
engraving on tools and garden equipment. 1/8"
shanks.
;4?.C6;4BAA2?@
This group has a wide variety of sizes and
shapes, and are made for intricate work on
ceramics (greenware), wood carvings, jewelry
and scrimshaw. They often are used in making
complicat ed printed circuit boards. They
should not be used on steel and other very
hard materials but are excellent on wood,
plastic and soft metals. 3/32" shank.
&A?B0AB?21'<<A5'B;4@A2;.?/612BAA2?@
Fast cutting, needle-sharp teeth for greater
material removal with minimum loading. Use
on fiberglass, wood, plastic, epoxy and rubber.
1/8" shank.
9B:6;B:#E612?6;16;4&A<;2@
?21/?<D;
Round, pointed, flat — you name the shape
and there is one available in this category.
These are made of aluminum oxide and cover
virtually every possible kind of grinding
application. Use them for sharpening lawn
(@2<;9F?2:29
I
5645=2?3<?:.;02.002@@<?62@Other accessories are not
designed for this tool and may lead to personal injury or property damage.
!
WARNING
?2:29002@@<?62@
DM 2610Z04970 10-13_9100 10/9/13 7:52 AM Page 15