SDS

ManualsBrandsDremel ManualsCutting WheelsDremel 426 Fiberglass Reinforced Cut-Off Wheels 1- 1/4" Dia., .045" Thick

Material Safety Data

Sheet

SECTION 1: CHEMICAL PRODUCT AND COMPANY

IDENTIFICATION

Product Name: Abrasive System Division

Product Description: Fiberglass Reinforced Cutoff Wheels with Labels

Dremel Cat #426, Part No. 2610930647

Dremel Cat #EZ 426, Part No.

2615400426

Dremel Cat #EZ 456, Part No.

2615400456

Dremel Cat #SC 456, Part No.

2615410456

Dremel Cat #EZ 476, Part No.

2615400476

Dremel Cat #SC 476, Part No.

2615410476

Dremel Cat #EZ 409, Part No.

2615400409

Dremel Cat #SC409, Part No.

2615410409

General Use: For slicing and cutting metal, wood and plastic. Making it easy to cut or slot bolts,

screws, sheet metal, thin wood and plastic.

Date of issue: August, 2013

Manufacturer/Distributor:

Robert Bosch Tool Corporation

1800 W. Central

Road

Mt.

Prospect

60056

For More Information Call:

(Monday-Friday, 8:00 AM– 5:00 PM CST)

Bosch

Customer Service

877-267-2499

In Case Of Emergency

Call

(24 Hours/Day, 7 Days/Week)

(866) 403-6302

SECTION 2:

COMPOSITION/INFORMATION

ON INGREDIENT

2-1 Cutoff Wheels ingredient (Except #EZ 476 ; #SC 476)

INGREDIENT C.A.S.No. PERCENT

Silicon Carbide 409-21-2 0

Aluminum Oxide 1344-28-1 81

Cured Adhesive Unknown 14.5

*Nylon Fibers or WEB Unknown 4.5

Calcium Carbonate 1317-65-3 0

Summary of content (7 pages)

PAGE 1
Material Safety Data Sheet SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: Abrasive System Division Product Description: Fiberglass Reinforced Cutoff Wheels with Labels Dremel Cat #426, Part No. 2610930647 Dremel Cat #EZ 426, Part No. 2615400426 Dremel Cat #EZ 456, Part No. 2615400456 Dremel Cat #SC 456, Part No. 2615410456 Dremel Cat #EZ 476, Part No. 2615400476 Dremel Cat #SC 476, Part No. 2615410476 Dremel Cat #EZ 409, Part No. 2615400409 Dremel Cat #SC409, Part No.
PAGE 2
Material Safety Data Sheet * Chemical composition: Al2O3 80 Na3AlF6 7 SiO2 6 BaSO4 2 Na2O 1 CaO 1 MgO 1 Others 2 2-2 Cutoff Wheels ingredient (#EZ 476 ; #SC 476) INGREDIENT C.A.S.No. PERCENT Silicon Carbide Series 409-21-2 83 Cured Adhesive Unknown 13 *Nylon Fibers or WEB Unknown 4 Calcium Carbonate 1317-65-3 0 * Chemical composition SiC SiO2 KAlF4 FeS CaO MgO Others of Silicon Carbide Series: ……………… ……………… ……………… ……………… ……………… ……………… ……………… 82 7.5 5 2 1 0.5 2 2-3.
PAGE 3
Material Safety Data Sheet 2-3. PHYSICAL DATA Boiling Point N/A Vapor Pressure N/A Vapor Density N/A Evaporation Rate N/A Solubility In water N/A Percent Volatile N/A PH N/A Viscosity N/A Melting Point N/A APPEARANCE AND ODOR Nonwoven fibrous handpad Impregnated with abrasive particles which are bonded together with cured resinous binders. 3.
PAGE 4
Material Safety Data Sheet Skin Contact: No adverse health effects are expected from skin contact. Mechanical skin irritation: signs/symptoms can include itching and redness. Ingestion: No hazard articipated through ingestion in normal industrial use. Chronic: Suspect Cancer Hazard (contains silica), Risk of cancer depends on duration and level of exposure to respirable dust SECTION 4: FIRST AID MEASURES INHALATION: If signs/symptoms occur, remove person to fresh air.
PAGE 5
Material Safety Data Sheet SECTION 8: EXPOSURE ECONTROL/PERSONAL PROTECTION Engineering Controls: Local exhaust ventilation should be provided to maintain the airborne exposure to personnel below the OSHA PEL and ACCIH TWA during handling and use Personal Protection/Respirator: Where engineering controls cannot be provided a NIOSH/MSHA approved respirator for dust's having a TWA not less than 0.05 MG/M3 should be used during buffing operation's.
PAGE 6
Material Safety Data Sheet Skin Protection:Not Applicable Recommended Ventilation: Provide appropriate local exhaust for grinding, cutting or sanding cured material. If exhaust ventilation is not adequate, use appropriate respiratory protection. Use particulate collection systems. Respiratory Protection: Avoid breathing of dust created by cutting, sanding or grinding.
PAGE 7
Material Safety Data Sheet SECTION 14: TRANSPORTATION INFORMATION Proper Shipping Name: Fiberglass Reinforced Cutoff Wheels Hazardoud Label Required: NONE IATA(Air Shipping Name): None IMO(Boat shipping name): None SECTION 15: REGULATORY INFORMATION TSCA (Toxic Substance Control Act):All components of this product are listed on the TSCA Inventory. CERCLA (Comprehensive Emergency Response, Compensation, and Liability Act): Not Reportable.