Safety data sheet

MATERIAL SAFETY DATA SHEET
Copper Harbor Company, Inc. Page 6 of 8
Date Prepared: 07/21/10
Date Printed: 3/28/11
MSDS No.: 0252-09
Product: G.A.L.CUTTING OIL ** Dremel PN 2610008485
14. DOT SHIPPING NAME
NON-REGULATED
15. OTHER INFORMATION
THIS PRODUCT CONTAINS COMPONENT(S) CITED ON THE FOLLOWING
REGULATIONS.
Chemical Name Cas Number
Ethylene Glycol 107-21-1
United States - TSCA
Inventory: Listed
Water Standards: No data available
Atmospheric Standards: Clean Air Act (1990) - List of Hazardous Air Contaminants: listed
CERCLA: Reportable Quantity (RQ): 5,000 pounds (532 gallons)
OSHA Hazard Communication
Standard: This product is a “hazardous chemical” as defined by the OSHA Hazard
Communication Standard, 29 CFR 1910.1200.
SARA Title III: Section 311/312 - Categories: Acute hazard; chronic hazard
Section 312 - Inventory Reporting: Ethylene glycol is subject to Tier I and/or Tier II annual
inventory reporting.
Section 313 - Emission Reporting
: Ethylene glycol is subject to Form R reporting
requirements.
Section 302 - Extremely Hazardous Substances
: Ethylene glycol is not listed.
State Right-To-Know:
California - Exposure Limits - Ceilings: vapor-50 ppm ceiling; 125 mg/m3 ceiling
Director's List of Hazardous Substances: listed
Florida - Hazardous Substances List: listed
Massachusetts - Right-to-Know List: listed
Minnesota - Haz. Subs. List: listed (particulate and vapor)
New Jersey - Right-to-Know List (Total): Present greater than 1.0%
Pennsylvania Right-to-Know List: environmental hazard
Canadian Regulations: This product has been classified in accordance with the hazard
criteria of the Controlled Products Regulations (CPR) and the MSDS contains all the
information required.