Safety data sheet

MATERIAL SAFETY DATA SHEET
Copper Harbor Company, Inc. Page 2 of 8
Date Prepared: 07/21/10
Date Printed: 3/28/11
MSDS No.: 0252-09
Product: G.A.L.CUTTING OIL ** Dremel PN 2610008485
Medical Conditions Generally Aggravated By Exposure:
Pre-existing lung conditions. Pre-existing urinary conditions.
4. FIRST AID MEASURES
Inhalation:
If respiratory symptoms or other symptoms develop, move victim away from source of
exposure and into fresh air. If symptoms persist, seek immediate medical attention.
Ingestion:
If conscious, give large quantities of water. CALL PHYSICIAN AT ONCE.
Eyes:
Flush for 15 minutes. Call physician immediately.
Skin:
Remove contaminated clothing and flush affected area(s) with large amounts water.
Note To Physician:
Delayed pulmonary edema may occur.
5. FIRE FIGHTING MEASURES
Flash Point: above 245F: TCC(after product evaporates to 95% of original volume.)
Extinguishing Media:
CO
2
, dry chemical, foam, water fog. Not incompatible with usual media.
SPECIAL FIRE-FIGHTING PROCEDURES:
Fire-fighters must use class B extinguishers. Water may be used to cool sealed cans and to
protect firefighters.
NFPA CODES: Health: 1 Flammability: 1 Reactivity: 0
HMIS CODES: Health: 2 Flammability: 1 Reactivity: 0
6. PRECAUTIONS FOR SAFE HANDLING AND USE
Steps To Be Taken In Case Material Is Released Or Spilled:
Hazardous concentrations in air may be found in local spill area and immediately downwind.