Operating instructions

7
• Alwayscheckthatthesupplyvoltageisthesameasthevoltage
indicated on the nameplate of the tool (tools with a rating of 230V
or 240V can also be connected to a 220V supply).
• Clamptheworkpieceincaseitdoesnotremainstationaryfrom
its own weight.
• Dustfrommaterialsuchaspaintcontaininglead,somewood
species, minerals and metal may be harmful (contact with
or inhalation of the dust may cause allergic reactions and/or
respiratory diseases to the operator or bystanders); wear a dust
mask and work with a dust extraction device when connectable.
• Followthedust-relatednationalrequirementsforthematerials
you want to work with.
• Besuretoolisswitchedoffwhenpluggingin.
DURING USE
• Alwayskeepthecordawayfrommovingpartsofthetool;direct
the cord to the rear, away from the tool.
• Neverusethetoolwhencordorbase-plate(=protectiveguard)is
damaged; have it replaced by a qualified person.
• Keephandsandngersawayfromrouterbitwhentoolis
switched on.
• Incaseofelectricalormechanicalmalfunction,immediately
switch off the tool and disconnect the plug.
• Incasetherouterbitisblocked,resultinginjerkingforcesonthe
tool, immediately switch off the tool.
• Incaseofcurrentinterruptionorwhentheplugisaccidentally
pulled out, immediately switch off the tool in order to prevent
uncontrolled restarting.
• Donotapplysomuchpressureonthetoolthatitcomestoa
standstill.
ENVIRONMENT
DISPOSAL
Themachine,accessoriesandpackagingshouldbesortedfor
environmental-friendly recycling.
ONLY FOR EC COUNTRIES
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/EC for Waste
Electrical and Electronic Equipment and its implementation
into national right, power tools that are no longer usable
must be collected separately and disposed of in an
environmentally correct manner.
APPLICATION ADVICE
• Usetheappropriaterouterbits.
• Forcutsparallelwiththesideofyourworkpieceusearipfence.
• Formakingparallelcutsinaworkpiecefarfromtheedge:
– fasten a straight piece of wood on the workpiece by means
of 2 clamps;
– guide tool with base-plate along edge of wood which now
functions as a rip fence.
• Protectyourselfagainsttheeffectsofvibrationbymaintaining
the tool and its accessories, keeping your hands warm, and
organizing your work patterns.
OPERATING CONTROLS
SeeFigure1:
DremelRotaryToolA
Speed ControlB
Mounting Wrench & Storage AreaC
Hand Grip (turn to lock)D
Collet Nut Wrench Storage Area (Wrench not included)E
Depth Scale (English/Metric)F
Edge GuideG
Circle GuideH
Shaft Lock ButtonI
Hand Grip (stationary)J
Adjustment Nut, LowerK
Depth StopL
Adjustment Nut, UpperM
Release ButtonN
ASSEMBLY
ASSEMBLING PLUNGE ROUTER ATTACHMENT TO
YOUR TOOL
ATTACHMENT FOR USE WITH DREMEL ROTARY TOOL MODELS 300,
395, 398, 400, 4000.
!
WARNING
Disconnect the plug from the power source
before making any assembly adjustments
or changing accessories. Such preventive safety measures reduce
the risk of starting the tool accidentally.
Remove collet nut, then remove housing cap from your rotary 1.
toolandsethousingcapaside(Fig.2).Thehousingcapmustbe
reinstalled when this attachment is not used. Once housing cap
has been removed, reassemble the collet nut.
SeeFigure2:
Housing CapA
Place tool into your router attachment with the shaft lock button 2.
facingforwardasshown(Fig.3).
Screw mounting nut clockwise onto the threaded portion of 3.
yourRotaryToolandsecurelytightenwiththemountingwrench
provided.
SeeFigure3:
Shaft Lock ButtonA
Mounting NutB
Mounting WrenchC
OPERATING INSTRUCTIONS
ATTENTION:ThisattachmentwillconvertDremelRotaryTooltoa
Plunge Router for freehand routing, edging, grooving, and circular cuts.
Therouterattachmentcomesassembledreadyforfreehandorpilot
bit routing.
Periodic cleaning and lubrication of guide posts will keep plunge action
smooth. Depress and lock plunge router and evenly apply a light
lubricant (i.e. petroleum jelly, cooking oil) to upper portion of guide posts.
!
WARNING
This Router Attachment is not intended for
use under a router or saw table.
Accessories specification
SeeFigure4A.
INSERTING THE ROUTER BIT
Therouterbitsareheldinthetoolbyacolletsystem.The bit may
be installed before or after the rotary tool is installed in the
attachment.
Depress and hold the shaft lock button while rotating the collet 1.
nut and shaft. Continue to rotate the collet nut and shaft until the
lockengagesandholdstheshaft(Fig.4).