SDS

SAFETY DATA SH EET
Page 3 of 6
SECTION 4: FIRST AID MEASURES
INHALATION:
If signs/symptoms occur, remove person to fresh air. If signs/symptoms continue, seek
medical attention.
EYE CONTACT:
Immediately flush eyes with plenty of water for 15 minutes. If abrasive particles are not
removed by flush, seek medical attention.
SKIN CONTACT:
Wash with soap and water. Wash clothing daily, imbedded abrasive particles can abrade skin
resulting in irritation
INGESTION:
Swallowing less than an ounce will not cause significant harm. For larger amounts do not
induce vomiting, but give two ounce glasses of water and obtain medical advice.
SECTION 5: FIREFIGHTING MEASURES
FLASHPOINT AND METHOD:
Not applicable
FLAMMABLE LIMITS:
Not applicable
AUTOIGNITION TEMPERATURE:
Not applicable
EXTINGUISHING MEDIA:
Water, carbon dioxide, dry chemical, foam
SPECIAL FIRE FIGHTING PROCEDURES:
Wear full protective clothing, including helmet, self-contained, positive pressure or pressure
demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face
mask, and protective covering for exposed areas of the head.
UNUSUAL FIRE AND EXPLOSIION HAZARDS:
Not applicable
NFPA HAZARD CODES: Health: 1, Fire: 0, Reactivity: 0, Unusual Reaction Hazard: none
SECTION 6: ACCIDENTAL RELEASE MEASURES
Sweep or scoop up material for reuse or reclaim if possible; otherwise place in a disposal container for
proper disposition. Do not flush to sewers or waterways unless authorized to do so by appropriate
government official.
SECTION 7: HANDLING AND STORAGE
STORAGE TEMPERATURE:
Ambient
GENERAL:
Keep out of sun and away from heat sources, as product may melt. Observe all safeguards for
container residue until cleaned or destroyed.