User Manual

Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
502, 503, 504, 10 8210 8-10 ---
505
Flapwheels
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
511E, 512E 66 4 6 6 - - -
Finishing Abrasive Buffs
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
150 10 8-10 2-4 -6---
Drill Bit
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
569,570 For Use on Wall and Floor Grout 6-8
Grout Removal Bits
Speed Settings (Continued)
* Speed for light cuts; Caution - burning on deep grooves.
• Depending on cutting direction relative to grain.
Not all speed settings can be achieved on 100 and 200 series tool. For certain applications,
a variable speed tool is required.
2 = 5,000 - 8,000 RPM's 4 = 9,000 - 11,000 RPM's
6 = 12,000 - 17,000 RPM’s 8 = 18,000 - 24,000 RPM’s 10 = 25,000 - 35,000 RPM’s
20
DM 2610004477 08-09:DM 2610004477 08-09 8/3/09 1:18 PM Page 20