User manual

- 35 -
patckets sent from server， phone will use the source IP
address, not the address in via field.
Enable GRUU Set to support GRUU
Enable Displayname
Quote
Set to make quotation mark to displayname as the phone sends
out signal, in order to be compatible with server.
4.3.3.2. IAX2 Config
IAX2 Confi
g
Field name explanation
Register Status Shows if the phone has been registered the IAX2 server or not.
IAX2 Server Addr Input your IAX2 server address.
IAX2 Server Port Set your IAX2 server port, the default is 4569.
Account Name Input your IAX2 register account name.
Account Password Input your IAX2 register password.
Phone Number Input your assigned phone number (usually it is same you’re your
IAX2 account name).
Local Port Set your local sport，the default is 4569.
Voice Mail Number Specify the voice mail’s number.
Voice Mail Text Specify the voice mail’s name.
Echo Test Number
Set echo test number. If IAX2 server supports echo test, and echo test
number is non- numeric, system could set an echo test number to
replace the echo test text. So user can dial the numeric number to test
echo voice test. This function is provided with server to make
endpoint to test whether endpoint could talk through server normally.
Echo Test Text Specify echo test text’s name.