Installation Instructions

INSTALLATION INSTRUCTIONS
Tools Needed
Crescent Wrench
Parts Provided
3 Bars: 1@17 inch bar 2@7 1/4 inch bars
4 Bolts, 4 Washers, 4 Locking Washers
4 Leveling Bolts
1. Turn bathtub upside down.
2. Remove nut from the bolts on the bottom of the tub.
3. Affix 17 inch bar to bolts at the back of the tub, Affix the 2: 7 1/4 bars to the
bolts at the from of the tub.
4. Put Bolt, Washer, Locking Washer together, loosely tighten in hole.
5. Place leg under the washer, tighten bolt (Repeat for other legs).
6. Screw in the 4 leveling Bolts to the same level.
7. Turn Bathtub rightside up, check level, affix plumbing.
Installation
ACRYLIC
CLAWFOOT
SLIPPER TUB