User manual
R699831 - Dreamy Geek User Manual
maIntenanCe
28
Contrast
The contrast function is used to adjust the contrast between the light and dark areas of the displayed image. A
correct contrast setting is important for good image reproduction. Adjust the Contrast value between 0 and 100.
Color
The Color function is used to adjust the saturation levels. Adjust the Color value between 0 and 100.
Sharpness
The Sharpness function is used to adjust the image sharpness of the picture. Adjust the Sharpness value between
0 (soft) and 100 (sharper).
Color Temp
The Color Temp adjustment sets the color temperature of the picture. Cooler temperatures are more bluish and
warmer temperatures are more reddish. Select the best setting between Cool, Nature, Warm and User.
13.0 MAINTENANCE
13.1 Clean Dirt
Dirt on the Cabinet
Always use a soft cloth. In case of heavy soiling, soak a cloth in neutral detergent diluted with water, wring dry
and wipe, followed by wiping again using a dry cloth.
Pay attention to the following as the cabinet may deteriorate in condition, get damaged or paint may
come off:
-Do not wipe with a stiff cloth.
-Do not wipe with force.
-Do not wipe with thinner or benzene.
Dirt on the Lens
The lens shall be cleaned using commercial blowers or lens cleaning papers (for cleaning glasses and cameras).
Do not use uid-type cleaning agents. The lens surface is fragile. Avoid rubbing it hard or knocking.
13.2 Unexpected Behavior
The Unit is unresponsive and/or the Temp LED is solid green
In a few cases, this unit may not respond to the remote control or may display a wrong picture. Make sure that
the batteries used in the remote control have still some power in it.
If the problem persists, try to switch OFF this unit and wait at least 10 minutes before powering it ON again.
Video is playing but there is no Sound
If there is no sound coming from the internal loudspeakers, make sure that the Audio settings have been correctly
set. Launch the Settings App, browse and set: Settings App > Audio Setting > External Speakers >OFF. Make
sure that the HDMI source is set to send audio through the HDMI input, and if you are using the VGA/PC or Video
inputs, make sure to have the audio cable correctly connected to this unit using the Audio L/R inputs (white and
red RCA connectors). Please note that the Stereo Jack 3,5mm may be used only as an audio output.