User manual

R699831 - Dreamy Geek User Manual
ConneCtIonS
14
6.2  Power ON
Ensure that the power cord is securely connected. The Power LED is red when in standby mode. Turn this unit
ON by pressing the Power button on the Control Panel for 3 seconds or by pressing the Power button on the
IR-RCU.
Power button
Press the Power button to power ON this unit.
6.3  Power OFF
To turn OFF this unit, press and hold for 3 seconds the Power button on the Control Panel or on the IR-RCU. You
may also press the Power OFF icon in the Status and Navigation Bar located at the bottom of the screen.
WAIT UNTIL COOLING CYCLE IS COMPLETE.
When switching this unit OFF, make sure that it completes its cooling cycle before disconnecting the
main power. Do not turn off the main power abruptly or unplug from the main power during operation.
Warning Indicators
The “Temp” LED indicator light green indicates that the projector has overheated. The projector will automatically
shut down. Wait at least 10 minutes before powering it ON again.
7.0  CONNECTIONS
7.1  Caution when connecting a Device to HDMI Input
Prior to connecting any device to this unit, switch the projector in standby mode. Never connect a HDMI
source to this unit when the projector is in operate mode. The HDMI termination is a self-powered
connection and can cause electric discharges.