User`s manual

Multi-Brand IR Remote Controller
1. Initial Setting
1. 1 DEVICE DEFAULT : STB
( '\ 1. 2 MODEL DEFAULT
STB ...................... # 001
T V .... .... ........ .. .. .. #00 1
DVD .... .... ... .. .. ....... # 001
VCR .. .................... # 00 1
2. Device Keys
Dev i ce Keys are used for device changing.
C ase of the model which POWER button comes to share wi th power on and power off. the DEVICE
button operates with power on . the POWER button operates with power off( LED ON ).
3. Code No. Checking(Number Call)
Step 1. Press the DEVICE and OK button during about 2.5 seconds at the same ti me.
DEVICE LED on .( Set mode )
Step 2. Press the INFO button.
LED will blink according to inputted mode number on the device.
Case of digit 0. it blinks 10 times.
4. Setting Guide
When there is no input during about 20 seconds from set mode . LED is turn off and set mode
is canceled .
.._) 4. 1 Using Device Code Number
Step 1. Press DEVICE and OK button during about 2.5 seconds at the same time .
DEVICE LED on.(Set mode )
Step 2. Input three digit code numbers .
DEVICE LED will blinks .
S tep 3. Press DEVICE button.
DEVICE LED will blinks twice.
) 4. 2 Using UP and DOWN buttons
S tep 1. Press DEVICE and OK button during about 2.5 seconds at the same time.
DEVICE LED on . (Set mode)
S tep 2. Press UP or DOWN button until DEVICE turns off. one and one .
Step 3. If your DEVICE is turn off
Press DEVICE button.
DEVICE LED will blink twice.