Installation Guide

“SLIMLINE SHOWER BASE” Ver.5 Rev.6 10/2015
16
Product Maintenance
BASES and BACKWALLS: To ensure a long life for your acrylic back walls: wipe them off after
each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream
based cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or
dull the surface.
GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use
with a soft cloth. Rinse and wipe off the glass using either a soft cloth or a squeegee to prevent
soap buildup and water spots. To prevent scratching the surface: never use abrasive cleaners
and cleaning products that contain scouring agents. Never use bristle brushes or abrasive
sponges.
HARDWARE: To ensure a long lasting finish: wipe off the metal parts after each use with a soft
cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid. If
accidentally used, rinse the surface as soon as possible to prevent finish peeling or corrosion.
After cleaning the shiny finishes, rinse thoroughly and wipe dry with soft cloth. Clean stainless
steel surfaces at least once a week. When applying stainless steel cleaner or polish, work with
(not across) the grain. Never use abrasive sponge or cloth, steel wool or wired brushes.
Fig. 9