Installation Guide

“SLIMLINE SHOWER BASE” Ver.5 Rev.6 10/2015
14
4. Level the tray and place marks on the
studs above the upper edge of the tile
flange.
See Fig. 5 for details.
5. Mix the bedding material (Mortar,
cement-sand mix, etc.) Concrete
or plaster is not recommended.
Apply enough bedding material
to support the entire bottom of
the shower base. This will add
additional stability and prevent the
base from shifting position.
See Fig. 6 for details.
Fig. 6
Level base in two directions
Mortar
Fig. 5