Specifications

© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
24UNIDOOR TOULON manual Ver 1 Rev 1 07/2018
©2018 DreamLine. All Rights Reserved
inside
Fig 1a
Fig 1b Fig 1c
Setting the Adjustable Hinges
85°
Inside
90°
inside
inside
1) The adjustable hinges are pre-set to
overclose to 85º and are adjustable up to 90º
after the door is installed. (Strike vinyl must be
used when the hinges are set to overclose).
2) The hinges are factory set
to 85º (Fig 1a). The closing
angle can be changed by
using the adjustment screws
on the hinge faceplate.
3) Use the supplied Allen key to loosen the
adjustment screws on the inside faceplates
(Fig 1b), adjust the door to the desired
closing angle (90º for example), then
re-tighten the adjustment screws (Fig 1b).
Be sure to create a tight seal with the strike
vinyl when the door is in the closed position.