Specifications

17UNIDOOR TOULON manual Ver 1 Rev 1 07/2018

1/16-1/8"

door

inline panel

Fig 12

Fig 13

insert 2” pcs of

the 0.5mm PVC

Glass Spacers

(#34) into the

bottom u-channel

0.5mm PVC

Glass Spacer (#34)

cut 2”pcs

NOTE: The Strike Vinyl Seal (#19) will

extend above the glass for now, but will

need to be notched to fit around the

bottom U-Channel in a later step.

13. Attach the Strike Vinyl Seal (#19) to the edge

of the Stationary Panel Glass (#11) to protect the

edge of the glass and to simulate the proper

spacing with the Door Glass (#01). (Fig 13)

12. Dry fit the Stationary Panel Glass (#11) and

U-Channels onto the threshold. Use the mark on the

threshold from Step #8 for reference. The install

positions of the U-Channels need to be marked on the

threshold and wall after the panel glass is aligned with

the Door Glass.

◾ Open the door and place the Bottom U-Channel 2

(#29) onto the threshold.

◾ Add several 2” pieces of the 0.5mm PVC Glass

Spacers (#34) into the Bottom U-Channel 2 (#29) to

protect the bottom corners of the glass. (Fig 12.1)

◾ Attach the Vertical U-Channel 1 (#09) onto the

Stationary Panel Glass (#11).

◾ Place the glass into the Bottom U-Channel 2 (#29)

and slide the assembly tight to the wall. (Fig 12)

The Stationary Panel Glass (#11) needs to be

aligned with the installed Door Glass (#01) and

the positions of the U-Channels marked for

drilling and installation.