Specifications

14UNIDOOR TOULON manual Ver 1 Rev 1 07/2018

Fig 6

Fig 7

inside

outside

Note: See page 24 for details regarding

the adjustable hinge features.

Open the door

and remove the

5/8” spacers

outside

door

6. Install the hinges to the wall using the ST5x70 Screws (#04). Be careful not to scratch the hinge

surfaces during installation. If necessary, remove the inside hinge cover plate to install the mounting

screws that are inside the shower. (Fig 6.2)

INSTALL THE DOOR:

Option #1 - Leave the hinges on the Door Glass (#01). Install the outside hinge plate screws first, then

open the door slightly and install the inside hinge screws.

Option #2 - Remove the hinges from the Door Glass (#01). Install the hinges onto the wall. Attach the

Door Glass (#01) to the installed hinges.

Use one (2mm) vinyl hinge gasket per side. Tighten the allen bolts and cover the allen bolts with the

decorative covers. (Fig 6)

7. After the Door Glass (#01) is securely installed onto the

hinges, attach the Handle (#02) to the Door Glass (#01).

Remove the 5/8” spacers from the bottom of the Door

Glass (#01). (Fig 7)