Installation Guide

7CHARISMA manual Ver 3 Rev 4 10/2016
Fig 4
Fig 3
W
W
BOTTOM RAIL (#01)
W = FINISHED OPENING -1/16”
Divide the amount to be cut off by 2...
...then cut off equal amounts from each end
For Example, if the rail measures 60” out of the
box and your finished opening = 57“, then you
will need to cut 1-1/2” from each end.
Place the Bottom Rail (#02) in the desired
position and parallel to the front edge of the
Shower base or the Tub deck.
(60“ minus 57” = 3“, divided by 2 = 1-1/2”).
Note that the actual cutoff amount will vary
based on the actual finished opening dimension.
See Fig 3 for details
3. Place the Bottom Rail (#02) in the desired
position and parallel to the front edge of the
Shower base or the Tub deck, and mark its
position on the threshold.
See Fig 4 for details