Installation Guide

13CHARISMA manual Ver 3 Rev 4 10/2016
Fig 16
Fig 15
1
4
7
8
9
5
6
2
Ø 1/8"
3
Ø 1/8"
center
outside
outside
left
right
14. As viewed from the outside:
Slide the Door Glass (#03) to
the right side and secure the Left
Guide block (#12) to the left end of
the Bottom Rail (#02).
Drill Ø1/8" holes into the Bottom
Rail (#02) through holes in the
Guide block (#12) and fasten the
Guide Block (#12) with the Round
head screw ST4.2×16 (#06).
Install the Middle Guide block (#12)
into the pre-drilled holes in the
Bottom Rail (#02) using the Round
head screws ST4.2×16 (#06).
Now slide the doors to the left side
and install the Right Guide block
(#12) to the right end of the Bottom
Rail (#02).
Cover the screws with the Decorative
covers for Guide block (#09).
See Fig 15 for details
15. Press the Bumper strips (#13) onto the
vertical edges of the Door Glass (#03).
Trim the bottom of the bumper strips so that
they do not bind in the guide blocks.
See Fig 16 for details