Installation Guide

10CHARISMA manual Ver 3 Rev 4 10/2016
Fig 9
Fig 10
1
2 3 4
5
6
Ø 5/16"
7
1
2 3
4
5
Ø 5/16"
NOTE: THE GUIDE RAIL (#01) MUST BE INSTALLED LEVEL AND
PARALLEL TO THE BOTTOM RAIL (#02) TO ENSURE PROPER
OPERATION OF THE DOORS.
8. Mark the drill holes on the wall using the Guide rail bracket (#11). Drill the holes using a Ø5/16”
drill bit. Insert the Wall anchors (#05) and secure the Guide rail bracket (#11) to the wall with the
Round head screw ST4.2×40 (#08).
See Fig 9 for details
9. Place the Guide Rail (#01) onto the installed Guide Rail bracket (#11). Use a level to confirm the
installation height of the second bracket before drilling on the opposite wall. Mark a level location for
the second bracket. Repeat Step #7 to mount the second Guide Rail Bracket (#11) to the wall.
See Fig 10 for details