Installation Guide

Tools

Tip: Measure the opening before proceeding with the installation

to be sure that the correct model size has been ordered.

Tip: Prior to installation, cover the shower/tub drain

with tape to prevent losing screws or small parts.

NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using the detailed

diagram and packing list in this manual as a reference. Before discarding the carton, check for small

hardware bags that may have fallen to the bottom of the box. If any parts are damaged or missing,

please contact DreamLine

for replacement. The shipping boxes may contain extra parts not used in

your model configuration.

NOTE: Retain these installation instructions for future reference.

Tip: Set screw gun clutch to low setting when installing

screws and bolts to prevent stripping the heads.

Q-Wall Tub manual Ver 1 Rev 2 11/2017

Tape

Measure

Pencil

Screwdriver

Phillips

(Ø 5/16")

Drill bit

Level

Caulk

(acrylic safe) Adhesive

Power

Drill

Hammer

Knife

T-Square

Hole Saw