Installation Guide

DUET manual Ver.1 Rev 5 11/2016 13
10. From inside the shower, slide both Glass Doors
(#01) to the right. Place the Left guide block
(#13) to the end of the guide rail and mark the
drill hole in the Bottom Guide rail (#04) through
the pre-drilled hole on the block using an Ø1/8”
drill bit. Drill the hole and secure the Guide block
with the Pan Head screw ST4.2×16 (08) using
the washers and the Decorative Covers (10).
See fig. 15 for details.
Repeat Step #10 to install the Middle guide
block and the Right guide block to the Bottom
Guide rail (#04).
See Fig. 15 for details.
3 1/2"
Ø 1/8”
3
2
4
5
1
Fig. 15
Fig. 14