Installation Guide

DUET manual Ver.1 Rev 5 11/2016 7
3. Secure Upper guide rail (#01) and Bottom
guide rail (#04) to the Glass profiles (#03)
with the Truss head screws ST4.2×16 (#15).
See Fig. 3 and Fig. 4 for details.
1
2
3
4
inside
outside
TIP: For ease of assembly, add
some liquid soap, wax or lubricant
to the screws prior to attaching the
glass profiles to the guide rails.
Using a low setting on your power
drill can also prevent stripping the
screws.
Note: There are 3 holes in the top
end of the glass profiles. Align these
holes with the holes in the Upper
guide rail to determine the left and
right glass profile.
inside
outside
4
3
2
1
EQ
EQ
"D"
CUT
BOTTOM
RAIL EQUALLY
FROM BOTH
ENDS
"D"
"D"
FINISHED OPENING - 2-1/4" = FINISHED CUT LENGTH "D"
Fig. 2
Fig. 3
Upper Guide Rail
Bottom Guide Rail