Installation Guide

Q-Wall Tub manual Ver 1 Rev 2 11/2017

NOTE: Be sure to drill the

holes on the correct

surface of the side panel

to match the dimensions

from Step#2

Fig 17a Fig 17b

Fig 18

Hole Saw

Right side wall fixtures

shown as an example

17. Transfer the fixture hole measurements (from Step #4) onto the Side Panel (#01) that will be

installed onto the wall with the fixtures. Drill the holes in the Side Panel (#01) using the appropriate

diameter hole saw or a handheld jig saw. (Fig 17a and Fig 17b)

18. Apply adhesive to the entire back surface of the Side Panel (#01)

and around the drilled fixture holes. (Fig 18)