Installation Guide

Q-Wall Tub manual Ver 1 Rev 2 11/2017

Fig 14

Fig 13a

Fig 13b

1” reference line

Trim line

13. Align both Back Panels (#02) at the top and tighten the screws on the Center Cover (#05) to

secure this assembly in place. Do not tighten the screws on the corner covers yet. (Fig 13a and Fig 13b)

14. Measure from the 1” reference line to the D

dimension line from Step #3. This will be dimension “S”.

(Fig 14)

Note: Refer to the “D” dimension from Step #3 to

determine the finished cut size “S” for the Side

Panel (#02) in the next steps. (D - 1” = S)