Installation Guide

DUET manual Ver.1 Rev 5 11/2016 14
11. Fasten the Rubber stopper (#14) inside the groove of the Wall
Profile (#02) using the Pan Head screw ST4.2×16 (#08).
Repeat for all 6 of the Rubber stoppers (#14).
See Fig. 16 for details.
12. Perform final adjustments of the Wall Profiles
(#02) on the assembled unit making sure that
the bottom rail is tight to the threshold. Drill
Ø1/8" holes through the Glass profiles (#03)
into the Wall profiles (#02) as shown in Fig 18.1
and attach them together using the Pan Head
ST4.2 x 16 screws (#08) along with the
decorative cover and washer. (#10).
See Fig. 17 for details.
1
2
2
1
Ø 1/8”
Fig. 17
Fig. 16