Installation Guide

Rev 1.1

11. Slide the right edge of the left Back panel (02) all the way

behind the Center cover (05) and push the Back panel

against the wall.

You can adjust the position of the Back panel before the

sealant sets.

Apply equal pressure to the whole surface of the Back panel

from top to bottom.

Fasten the Corner cover (04) to the left corner of the back

wall using the Countersunk screws ST4.2×30 (07). Do not

tighten the screws.

See Fig. 15 for details.

Fig. 15

12. Repeat Step 10 and Step 11 to install the right Back panel

(02) to the right side of the back wall.

See Fig. 16 for details.

Fig. 16