Installation Guide

Ver. 2, Rev. 1
8
8. Mark the drill holes on the wall using the
Guide rail bracket (11).
Drill the holes using Ø 5/16” drill bit, insert the
Wall anchors (05) and secure the Guide rail
bracket to the wall with the Round head
screw ST4.2×35 (08).
See Fig. 9 for details.
Fig. 9
9. Repeat Step 6
/ Step 7 and Step 8 to mount
the second Guide rail bracket (11) to the
opposite wall.
See Fig. 10 for details.
Note: The Guide Rail (01) must be
installed
level and parallel to the Threshold
(02) to ensure proper operation the unit.
Fig. 10
3
2
1 4
5
Ø5/16"
3
2
1 4
5
Ø5/16"