Installation Guide

Ver. 2, Rev. 1
5
Fig. 3
3. If the Threshold (02) has been cut off, the pre-drilled
hole may be shifted. In this case you will need to drill
another hole. Drill the hole from the top, 1-1/2” away
from the end of the Threshold.
Drill through both layers of aluminum using Ø3/16”
drill bit, and then enlarge the hole of the first layer
with Ø5/16” drill bit.
See Fig. 4 for details.
Fig. 4
W
W
3/4”
3
1 1/2″
Ø 5/16”
Ø 3/16”
1
2