Installation Guide

“AQUA ULTRA” Rev.2 Ver.1 07/13
6
3. Apply waterproof silicone
along the bottom surface
and around the holes of
the U-Channel 1 (01).
Fasten the U-Channel 1
to the wall with the
Countersunk screws
ST4.2×40 (08).
Apply Waterproof silicone
into the groove of both
U-Channels.
See Fig. 5 for details.
Fig. 5
4. Slide the Stationary glass
(03) into the groove of both
U-Channels.
NOTE:
If you have difficulty sliding
the Stationary glass into the
U-Channels, you can slightly
tap on the Stationary glass
with a rubber mallet and a
piece of wood.
Apply a bead of silicone on
both ends of the U-Channels,
and its connection.
See fig. 6 for details.
Fig. 6
2
3 1
4
waterproof
silicone
1
2
3
4