Installation Guide

Rev 2.2
6
5. Mark the drilling hole on the
threshold for Bottom bracket (11).
Set the Stationary glass (01) aside.
Drill the hole in the threshold using
Ø1/8” drill bit and fasten Bottom
bracket to the threshold using the
Round head screw ST4.2×30 (08).
See Fig. 5 for details.
Fig. 5
6. Place the Stationary glass (01) back into
the designated position and assemble the
Wall brackets (06) and the Bottom
bracket (11).
Do the final adjustments of the Stationary
glass and fasten tight the Brackets.
See Fig. 6 for details.
Fig. 6