Installation Guide

Rev 2.2
9
10. Get three measurements:
• from the top edge of the Glass door (02) to the top edge of
the upper Hinge (06);
• from the bottom edge of the upper Hinge to the top edge of
the bottom Hinge;
• from the bottom edge of the bottom Hinge to the surface of
the shower base. Cut the Anti-water strip (12) according to
the measurements.
Press the cut strip on to the vertical edge of the Glass door.
See Fig. 11 for details.
Fig. 11
1. Apply the sealant along the connection of
the stationary glass with the wall and the
Shower base.
Fig. 12