Installation Guide

Rev 2.2

Fig. 11

9. Install the Hinges (04) on the Stationary glass (02) with

the decorative non-screw side facing outwards. Hang the

Glass door (05) from the inside. You will need assistance

in this process.

NOTE:

Use clear rubber gasket to prevent glass to

metal connection.

Start first from the top hinge when you begin to hang the

door on. Make sure that until both hinges are installed

securely, do not swing around or lean/bend to any side the

Glass door because this can cause the hinge to snap and

breakage of the glass.

After the hinges are installed open and close the door to

make sure it’s operation is nice and smooth. Perform

necessary adjustment to have the top edge of the door

aligned with the stationary glass.

See Fig. 12 and Fig. 13 for details.

Fig. 12