Installation Guide

Rev 2.2
6
4. Take apart the Bottom bracket
(14),
place the mounting part into
the U shape hole on the Stationary
glass (02) from inside and mark
the drill hole on the threshold, tray
or bathtub.
Remove the glass, drill the hole
using Ø1/8” drill bit and secure the
mounting part of the Bottom
bracket with Round head screw
ST4.2×30(10).
See Fig. 5 for details.
Fig. 5
5. Place the Stationary glass (02) back
into the Wall profile.
Assemble the Bottom bracket (14).
Fasten tight the Stationary glass (02)
in the Wall profiles and cover screw
holes with Decorative plugs (08).
See Fig. 6 and Fig. 7 for details.
NOTE
: Make sure to use clear
rubber gasket to prevent glass to
metal connection.
Fig. 6
1
2
3
4
Ø1/8"
1
2
3