Installation Guide
Rev 2.2
5
3. Push U-Shape seal gasket (13)
over the vertical edge of the
Stationary glass (02).
Place the Stationary glass with
attached U-Shape seal gasket onto
the Shower base and slide it into
the Wall profile (External) (01a).
Attach the Wall profile (Internal)
(01b) to the Wall profile (External)
and the Stationary glass using
Countersunk screws ST4.2×15
(09).
Level the Stationary glass vertically
and fasten the screws.
See Fig. 3 and Fig. 4 for details.
Fig. 3
Fig. 4
1
3
2
4