Installation Guide

Rev 2.2
4
Shower/Tub Door Installation
1. Place the Wall profile (External) (01a) to the wall
above the Shower base or Tub and level it
vertically.
See Fig. 1 for details.
Fig
. 1
2. Mark the drilling holes on the wall
through the holes in the Wall profile
(External) (01a).
Place the Wall profile (External)
aside, drill the holes using Ø5/16” drill
bit and insert the Wall anchors (07).
Apply silicone caulk along the wall
profile and around the holes on the
wall.
Place the Wall profile (External)
back into the designated position and
secure it to the wall using the Round
head screws ST4.2×30 (10).
See Fig. 2 for details.
Fig. 2
1
3
2
4
Ø5/16"