Installation guide

“AQUA” Rev.3 Ver.1 02/2014
7
7. Install both Hinges (04) on the Stationary glass (02) with the
decorative non-screw side facing outwards. Hang the Glass door
(05) from the inside. You will need assistance in this process.
NOTE: Use 5/8” shim beneath the glass door to hold it in
position while you attach the hinges.
NOTE: Use clear rubber gasket to prevent glass to metal
connection.
Begin at the top hinge when hanging the door. Do not swing,
lean on, bend or move in any way the Glass door until both
hinges are securely installed, as this could snap the hinge or
break the glass.
After the hinges are installed, open and close the door to make
sure the operation is nice and smooth. Perform necessary
adjustment so that the top edge of the door is align with the
stationary glass.
See Fig. 7 and Fig. 8 for details.
1
2
Inside
Outside
Fig. 7
Fig. 8