Installation guide

“AQUA” Rev.3 Ver.1 02/2014
5
3. Slide the Stationary glass (02) into the groove of
the Wall profile (01).
See Fig. 3 for details
4. Take apart the Bottom bracket (14).
Place the Bottom bracket base into the notch
on the bottom of the Stationary glass (02)
from inside and mark the drill hole on the
threshold, tray or bathtub.
Remove the glass, drill the hole using Ø1/8”
drill bit and secure the Bottom bracket base
with Round head screw ST4.2×25 (13).
See Fig. 4 for details.
Fig. 4
1
2
3
4
Ø1/8"
Inside
Outside
Fig. 3