Installation guide

“AQUA” Rev.3 Ver.1 02/2014

Shower/Tub Door Installation

1. Place the Wall profile (01) to the wall above the shower

base or tub and level it vertically.

See Fig. 1 for details.

2. Mark the drilling holes on the wall through the holes in

the Wall profile (01).

Place the Wall profile aside, drill the holes using Ø5/16”

drill bit and insert the Wall anchors (07).

Apply silicone caulk along the wall profile and around the

holes on the wall.

Place the Wall profile back into the designated position

and secure it to the wall using 4 of the Big head screws

ST4.2×40 (10).

See Fig. 2 for details.

Fig. 2

Ø5/16"

Fig. 1