Installation guide

“AQUA” Rev.3 Ver.1 02/2014
9
10. Apply caulk inside and outside along bottom
and vertical edge of the stationary glass and
wall profile.
See Fig. 11 for details.
Product Maintenance
To ensure long lasting life for your acrylic back walls, wipe them off after each use with a soft cloth. To clean
the acrylic back walls use non-abrasive sprays or cream based cleaners. Never use abrasive cleansers, metal
brushes or scrapers that could scratch or dull the surface.
To ensure long lasting life for your glass shower products, wipe them off after each use with a soft cloth. Rinse
and wipe off the glass using either soft cloth or squeegee to prevent soap buildup. Never use abrasive cleaners
and cleaning products that contain scouring agents as this may scratch the surface. Never use bristle brushes or
abrasive sponges.
To ensure a long lasting hardware finish, wipe off the metal parts after each use with a soft cloth. Do not use
abrasive cleaners or cleaning products containing ammonia, bleach or acid. If accidentally used, rinse the
surface as soon as possible to prevent finish peeling or corrosion. After cleaning the shiny finishes, rinse
thoroughly and wipe dry with soft cloth. Clean stainless steel surfaces at least once a week. When applying
stainless steel cleaner or polish, work with (not against) the grain. Never use an abrasive sponge or cloth, steel
wool or wired brushes.
Caulk
Fig. 11